Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Locked Down Link 1
Src IP 192.168.12.3 Port 0800 Dest IP 192.168.12.9 Port 0434
EthDown::TFTPD_OPEN::boot.bin
-EbootSendBootmeAndWaitForTftp
EbootInitEtherTransport OK!
Download BIN file information:
-----------------------------------------------------
[0]: Base Address=0x98380000 Length=0x158E308
****** Downloading operating system image for FLASH target ******
ｹｫ・劔ﾍ篇00.
-------------------------------------------------------------------------------
Writing 0xA00B8000 to flash address 0x98380000 (length=0x158E308).
Sector=0x400 (Length=0xAC72) Block=0x2 (Length=0x57).
Handling non-block aligned data...
FlashErase: Unlocking flash block(s) [0x2, 0x58] (please wait): Done.
Erasing flash block(s) [0x2, 0x58] (please wait): ..............................
.........................................................Done.
Writing to flash (please wait): ｢ﾋｫｹ
-------------------------------------------------------------------------------
Found pTOC signature.
ROMHDR at Address 98380044h
RomHdr.ulRAMStart=820B8000h RomHdr.physfirst=98380000h.
Done.
Writing 0x80068118 to flash address 0xB8340000 (length=0xA3C).
Sector=0x200 (Length=0x6) Block=0x1 (Length=0x1).
Handling non-block aligned data...
FlashErase: Unlocking flash block(s) [0x1, 0x1] (please wait): Done.
Erasing flash block(s) [0x1, 0x1] (please wait): .Done.
Writing to flash (please wait): Done.
Got EDBG_CMD_JUMPIMG
Got EDBG_CMD_CONFIG, flags:0x00000000
Download successful! Jumping to image at physical 0x81000...
*******Beginning System Initialization*******
SDCLK[1] = MemClk
CoreClk = 208.00 MHz
Turbo Mode = 2.5 * Run Mode
Mode = TURBO
Bus Mode = FAST
Beginning SDRAM Scrub...
SDRAM Scrub Complete